|
Post by novacaine on Apr 3, 2011 16:26:04 GMT -5
I looking for a drive shaft that will fit a 74 Nova. Mine is two pieces but the best I can tell its 52.5 from the end of yoke to yoke. And Im looking for a Powerglide case. Thanks, Mike Hager
|
|
|
Post by headsup on Apr 7, 2011 9:32:42 GMT -5
Mike, 52.5 from tip of yoke to universal joint? Pg yoke or turbo yoke?
|
|
|
Post by novacaine on Apr 7, 2011 18:58:58 GMT -5
Its from the outside of both yokes and its a powerglide shaft. Thats a rough guess since its broke into. Its pretty well a stock length that has a 8.5 , 10 bolt and a powerglide trans.
|
|
|
Post by headsup on Apr 8, 2011 14:08:58 GMT -5
I'll look for our old one at the shop tonight.
|
|
|
Post by novacaine on Apr 8, 2011 18:58:27 GMT -5
Thanks Rodney
|
|
|
Post by headsup on Apr 12, 2011 9:05:05 GMT -5
Shaft I have is 53 from end of both joints.
|
|
|
Post by novacaine on Apr 12, 2011 13:45:33 GMT -5
Thats should be the right size. I measured mine as two pieces and wasnt sure how much was lost on the break. Give me a call and let me know how much you want for it and I will meet you and pick it up.
|
|
|
Post by sponge003 on Apr 12, 2011 14:14:54 GMT -5
Mike
I have a powerglide case.
Paul Weeks
|
|
|
Post by novacaine on Apr 12, 2011 20:24:28 GMT -5
Paul, I will give you a call tomarrow..what is a good time.
Mike Hager
|
|
|
Post by novacaine on Apr 12, 2011 20:25:19 GMT -5
Rodney you have a pm Shaft I have is 53 from end of both joints.
|
|